The co2 laser cutter machine can automatically adjust the working table to satisfy the demands of cutting different thicknesses materials. The lifting height can reach 20cm.
Auto focusing makes the laser head focus easily and quickly. The co2 laser cutter do not need to adjust the focal length by hand, saving much time and has higher accuracy.
LC1390N CO2 laser cutter has four sides feeding material system, you can cut and engrave the material at the largest scale.
Adopted Taiwan Hiwin linear guide rail, high positioning accuracy, scroll guide, reduce wear to maintain accuracy for a longer time.
Higher laser output power density, concentrated light beam, uniformly light spot, high working efficiency, high cutting speed. The laser tube adopts the special manufacturing technique, the laser beam is sharpen after focusing, the mark line is narrow, the scale is deep, the resolution is high, the picture character is clear.
Convenient- Engineers can remotely control computers and machines, adjust parameters and solve problems.
Efficiency- One PC can control several machines.
U.S. optics from American Photonics. Proven 14% beam transmission improvement vs. other optics. High strength gold-plated lenses and aspheric focusing lenses made by II-VI Company, USA.
High focus, high transmittance. The lenses can not only ensure the quality of the CO2 laser cutting machine but also make the optical system run a long time with high efficiency and low cost.
Lower noise, low vibration, running more smoothly, higher torque, higher acceleration, higher precision, better acceleration performance.
The fan can be started by one button. CO2 laser cutter can control the fan independently.
The CO2 laser cutting machine has a knife blade and honeycomb platforms for cutting and engraving.
Environmentally friendly and pollution-free laser can be directly used indoors.
Filter large particles in bags.
HEPA filtration larger than 0.03UM particle.
Activated carbon adsorption system.
|Laser - Type
|Sealed CO2 laser tube
|80W 100W 130W 150W 200W (optional)
|1300mm x 900mm
|Whole Machine Size
|1820* 1310* 1070mm
|0 - 24,000mm/min
|Resetting Positioning Accuracy
|AC 110 -220V±10%, 50-60Hz
|Minimum Shaping Character
|18cm lift platform
|Water-cooling and protection system
|Exhaust-fans, air-exhaust pipe
|DSP control system
|CorelDraw AutoCAD Photoshop
Wood, organic glass, plastic, garments, paper, leather, rubber, and other nonmetal materials.
Sheet and tube laser cutting machine can cut sheet and tube at same machine.MORE
Dual platform fiber laser cutting machine, improving feeding efficiency, reducing production cost.MORE
Fiber laser cutting machine for metal and non-mtal processing mixed with CO2 laser tube.MORE